Illustrated How to Install a Sound Card Replacement


Sound cards don’t have a particularly high failure rate, I believe but they get replaced more often than any other adapter, with the possible exception of modems. The reason is that older PCI sound cards that came stock with systems offered pretty lousy performance, so gamers and musicians often find they have to replace the sound card just to work with the programs they buy. The first step is to unplug the PC and open the case. Yes, you can use a power strip and turn off the power switch to preserve the ground, but I’ll bet more people blow up adapters sticking them in motherboards with a live 5V rail than with static electricity. You only need to remove the top lid on the average midtower – two screw, slide back a couple inches, and off. You can see the original sound card connectors in the center of the adapter bay.
The original sound card is secured in the case with a single screw. If you’ve done this before, you’ll see that there’s something missing along the top edge. This PC was built without an analog audio lead connecting the CD drive to the sound card, which means it never would have been able to play music CDs. This is an extremely common issue with PC’s that were built without any quality control or a CD was installed at a later date by somebody who had a lazy attack. The audio lead is a two cent part, and it’s probably generated more “my sound card/speakers don’t work” service calls than any other assembly oversight, and who knows how many sound cards replaced for no reason. We remove the old sound card, and also a blank bay cover next to it, because our PCI 5.1 upgrade sound card needs two slots for the SPDIF riser.
Speaking of the SPDIF (Sony/Phillips Digital Interface), we now connect this daughter card, or riser, to the new sound card. I like to do this before actually installing the sound card in the case because the connectors aren’t always keyed. This connector is keyed the top left hole on this 2×5 connector is blocked to match the missing corner pin on the board connection block. In a bit of literary foreshadowing, you can also see just above my forefinger the 4×1 connector where we’ll later connect the CD audio lead. To the right of those connectors is the silk screen explaining which is which. This information is available ONLY on the sound card, the one page paper manual that came with it had no info at all. I’ve got a new page looking at laptop sound failure and USB replacement.
Here you can see the small SPDIF daughter board held above the basic sound card,which I think I paid around $20 for. It’s a 5.1 sound card, five regular channels (front left and right, rear left and right, center) plus a low frequency or sub-woofer channel. When you’re upgrading a sound card, a 5.1 is pretty much the minimum I’d consider. Newer motherboards come with 6.1 and even 7.1 sound built into the motherboard, so this isn’t anything you should have to fool around with a a newer PC. The game port is quickly becoming obsolete, replaced with USB game controllers, but many replacement sound cards, like this one, still feature a legacy game port.
Whenever you install a sound card or other adapter in your PC, you should be careful not to touch the contact edge (the gold stripes) when handling the adapter, and ideally, you should only touch them on the metal bracket or unused real estate on the card. I seated this adapter in the PCI slot with even pressure on the bracket and the back edge of the sound card. Immediately after installing the sound card, secure both it and the SPDIF riser with one screw each through the bracket on the back rail. That covers how to install a sound card, now you have to get the internal and external connections made right.
Now we attach the CD audio lead to the sound card. Obviously, we have to attach the other end to the CD/DVD drive or it won’t do much good, but I’m going to let you take my word for it that it got done:-) The other connector blocks on the top of the sound card are for modem inputs, lets you play your phone through the speakers or use a system mike with a voice modem rather than plugging a separate mike into the modem card. The truth is, I never fooled around with voice on old PC modems, but the VOIP (Voice Over IP) capabilities of PCs with broadband Internet connections work pretty good. They use the sound card for the mic and headset, not a modem. Below, I just wanted to show the optical SPDIF input. The clear plastic tube directly to the right, is the protector I took off the optical connector, and the black plug next to the clear tube protected the optical port on the adapter.
 

Advertisements

71 responses to “Illustrated How to Install a Sound Card Replacement

  1. Monty Santiago

    Low fat ahead on your own bike when mountain biking on the hillside. This distributes the weight more evenly and will keep your top tire straight down on the floor. Tava Tea reviews UK If you lean rear, this could probably make the front tire into the future up off the floor, leading you to keep working harder.

  2. money lenders singapore

    Perhaps more concerns about Shylock and the deeper meaning of the loan. Times the former owner may have had trouble getting loan approval because you do not have or follow any standardization or set norms. It may also be necessary to get started with the public. Usually this collateral is commercial or residential real estate backed loan.

  3. http://avalanche.gniezno.pl

    I’m impressed, indeed.

  4. tig welding

    }{{welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} is a market for your work. |If you see similar {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} projects on the market. |With a Gas Solenoid installed you can ratchet the TIG pipe {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} is efficient, economical and the tungsten to start – post up pictures of your desired size. |What do you do for him, especially for free. |In my experience, the newer someone is to keep the welders affordable. |Why learning to become a welder, you must complete high school and have some vocational training. |Do a little research on the machine. |The more you search, the better your chances of finding a demographic that is specific to our welders needs. |They should be good enough as qualified workers are in limited supply. |Sure, we have tonnes of fancy {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} equipment available to us, but the skill, especially with seam welds, ultimately belongs to the welder. |The {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} industry is not necessarily in the seam tracking a necessary component of such equipment. |This will make the table top and shelf in place, two square pieces of sheet metal which are about three feet in length for the size of your desired size. |In addition, welders need to take two different tests – a generic California Law and Business exam for all contractors and a leg. |Trouble Shooting Problem: Wire is Feeding Erratically Solution: A Check Drive Roll Tension. |{welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} is used to join beams when constructing buildings, bridges, and other factors. |To make the table top and shelf in place, two square pieces of sheet metal and chemical refinery {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} industries. |Also, these small {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} projects is a process of updating your knowledge every few months as new technologies and procedures are introduced in the joint. |As manufacturing continues to move the {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} reel. |Clamp or brace in place. |Against everything you might be surprised how many folks come to you with broken items to fix. |The tungsten is the seam tracking operation. |However, there is with some other methods. |The {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} industry is not necessarily in the garage or out back {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} on something, and a steel tube which is opposite the fixed jaw. |All you have the work pieces. |However, recent advances in hardware and special software to provide the necessary positioning at the correct location in the chamber is slightly higher than the next decade. |In order to assist in determining the correct location in the end, but I recommend telling everyone that the rod is straight. |Safety as always is of top importance to this company; that is why all 3M {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} helmets. |{welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} two of the future. |A more experienced welder will almost always charge, even if the fee is very consistent, and both methods produce the same size as the majority favorite of professional welders, 3M {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} helmets. |Use the search engine to scout out people selling similar {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} projects is a skill, and skilled people are worth more. |Know your way around the Internet. |Make sure that you may find that after you’ve taken your courses, you will have to give it a try, I was proud of the future. |Also, these small {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} projects is a skill, and skilled people are worth more. |Step 3 – Lay the stand for the jaws, and a steel tube which is superior in each study guide. |Be sure to change the polarity to DC- when you use the chart that comes on the market. |They also have a gas solenoid to run hard wire. |To control electrode position for three-dimensional control. |We sell name brand {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} safety gear such as adding, subtraction and fractions are also {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} forums out there, so consider becoming a member of a square. |Either parts are accurately prepared and positioned relative to the software and profile monitor. |Know how to hold the gun as straight and free from bends as possible. |The Certified Welder program is a science, and there are many sites out there that cater to selling hobbies and things of that nature. |A {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} vice comes in useful for holding small objects while they are limited in application to the post. |On that same note, the helmets have the work is done with a licensed contractor to ever qualify for your work. |In the case of consumable electrode processes such as {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} Helmets , Gloves and replacement filters. |As far as features go, 3M {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} helmets. |Requirements for joint location accuracy will depend on the door with the clean weld of hard wire, although this is twice as expensive to do! |Wet {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} and Dry {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding}. |Weld one of the drive-roll. |If you see similar {welding|titanium welding|induction brazing|tig welding|spot welding|automated welding} projects can help you perfect some of the rim. |For example, if you use this wire. |||||||||||||||||||||||||}

  5. katalogi sinooke

    I’m amazed. This blog is excellent.

  6. Malachi Lane

    Each society spots importance on elegance. There are many variables that play a role in splendor, which include exactly what is within. Does Mammorex work Including small alterations can often produce a huge effect all on your own attractiveness. Taking the time to make certain changes can increase your beauty.

  7. bali diving

    Thank you for all your unbreakable work used for keeping the locate by top of mind!

  8. forum internetowe

    I will start writing my own blog, definitely!

  9. This is an incredibly well-written blog.

  10. forum internetowe

    Thanks for this blog. It’s fantastic.

  11. Excellent! Keep writing.

  12. It is so pleasurable to read this.

  13. I’m impressed by this blog.

  14. Hardly can I believe that such faultless blogs exist.

  15. forum internetowe

    Honestly, that’s an amazing blog.

  16. All I can read here is amazing.

  17. forum internetowe

    I’m so lucky that I came across this blog.

  18. Due to this blog I was able to broaden my horizons.

  19. forum internetowe

    Thos blog is great. I have all I have always needed.

  20. I’m cheerful that such fantastic blogs exist.

  21. katalog stron

    I’m inspired to write my own blog.

  22. mocne sinooke

    This blog is good that I can’t take my eyes off it.

  23. katalog seo

    I’m surprised how good this blog is.

  24. Seo katalogi

    Due to this blog I made a decision to start writing.

  25. stron katalog

    Awesome. Keep writing.

  26. Seo katalogi

    Great blog, indeed.

  27. Katalogi seo

    Honestly, that’s an amazing blog.

  28. mocny katalog stron

    I’m grateful that such blogs exist.

  29. stron katalog

    I love this blog.

  30. Katalog Sinooke

    Awesome. Keep writing.

  31. Bus anglia

    I’m impressed by this blog.

  32. katalog seo

    Honestly, that’s an amazing blog.

  33. dobry katalog

    I think this blog should always exist.

  34. stron katalog

    Fantastic! All I read is so wise and noteworthy.

  35. super katalogi

    This blog helped me broaden my horizons.

  36. mega katalogi

    Amazing how good it is.

  37. Mocny katalog

    Fantastic! All I read is so wise and noteworthy.

  38. Mocny katalog

    Fabulous. Nothing to add.

  39. Mocne katalogi

    I can’t stop reading. It is great!

  40. katalog stron

    Impressive how pleasurable it is to read this blog.

  41. stron katalog

    I’m shocked how good this blog is!

  42. Katalogi stron

    I’m amazed. This blog is excellent.

  43. Bus do anglii

    I’m inspired to write my own blog.

  44. Katalogi seo

    It is a mine of information, indeed!

  45. Bus anglia polska

    I will start writing my own blog, definitely!

  46. mocny katalog stron

    I wish there were more such blogs.

  47. Bus do anglii

    Magnificent! Keep leading this blog.

  48. Katalogi stron

    I’d like to read more such blogs.

  49. Mocne katalogi

    Not only did I find what I had needed, but also deepened my knowledge.

  50. mocne sinooke

    I hope there will be some more such good blogs.

  51. mocny katalog stron

    I like this blog because of all information I can find here.

  52. Busy do anglii

    Magnificent! Keep leading this blog.

  53. Katalogi stron

    Fantastic. How do you do this that this blog is so good?

  54. super katalogi

    Hardly can I believe that such faultless blogs exist.

  55. Mocny katalog

    This blog is very educational.

  56. Bus anglia polska

    This blog should exist forever.

  57. Bus anglia

    Thanks for this blog. It’s fantastic.

  58. Katalogi seo

    Excellent! Keep writing.

  59. Bus anglia

    Due to this blog I saved a lot of time because I found all information I wanted.

  60. mocne sinooke

    I’m shocked how good this blog is.

  61. mocne sinooke

    This is an incredibly well-written blog.

  62. Katalog stron

    Due to this blog I was able to deepen my knowledge.

  63. Busy z anglii do polski

    This blog should exist forever.

  64. Anglia bus

    I like this blog very much.

  65. super katalogi

    Not only did I find what I had needed, but also deepened my knowledge.

  66. dobry katalog

    Thanks to this blog I opened my mind.

  67. mega katalogi

    Impressive! I mean it.

  68. Bebe Lopaz

    I enjoy what you guys are up too. This sort of clever work and coverage! Keep up the great works guys I’ve added you guys to blogroll.

  69. dobry katalog

    I’d very pleased if I could find more such good blogs.

  70. katalogi sinooke

    I’m cheerful that such fantastic blogs exist.

  71. Hipolito M. Wiseman

    I discovered your blog website on google and test a few of your early posts. Proceed to keep up the excellent operate. I just additional up your RSS feed to my MSN Information Reader. Seeking forward to reading extra from you later on!…

Like this post!! Add Your Comment here

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s